Relevant JN0-650 Questions & Reliable JN0-650 Test Preparation

Wiki Article

If you ask me why other site sell cheaper than your TestPassKing site, I just want to ask you whether you regard the quality of JN0-650 exam bootcamp PDF as the most important or not. Sometime I even don't want to explain too much. Sometime low-price site sell old version but we sell new updated version. If you want to get the old version of JN0-650 Exam Bootcamp PDF as practice materials, you purchase our new version we can send you old version free of charge, if this Juniper JN0-650 exam has old version.

Our web backend is strong for our JN0-650 study braindumps. No matter how many people are browsing our websites at the same time, you still can quickly choose your favorite JN0-650 exam questions and quickly pay for it. There has no delay reaction of our website. So you can begin your pleasant selecting journey on our websites. And you will find our JN0-650 practice materials are easy to download.

>> Relevant JN0-650 Questions <<

Reliable JN0-650 Test Preparation | JN0-650 Real Dumps Free

Our JN0-650 Study Materials are recognized as the standard and authorized study materials and are widely commended at home and abroad. Our JN0-650 study materials boost superior advantages and the service of our products is perfect. We choose the most useful and typical questions and answers which contain the key points of the test and we try our best to use the least amount of questions and answers to showcase the most significant information.

Juniper Enterprise Routing and Switching, Professional (JNCIP-ENT) Sample Questions (Q11-Q16):

NEW QUESTION # 11
Which address range is used for source-specific multicast?

Answer: A


NEW QUESTION # 12
Exhibit

You need to configure the non-RP routers in your network to dynamically learn the location of the RP using standard protocols only. You have already applied the configuration shown in the exhibit, but the routers have not learned the location of the RP.
Which additional step must you take to fulfill these requirements?

Answer: B

Explanation:
The exhibit shows a multicast network running PIM Sparse Mode where R2 is configured as a local Rendezvous Point (RP). However, the non-RP routers (like R5) show no learned RP in their show pim rps output. To resolve this using standard protocols for dynamic RP discovery, you must implement a mechanism that automates the distribution of RP information across the PIM domain.
Bootstrap Router (BSR) (Option B): BSR is the industry-standard (RFC 5059) mechanism for dynamically electing an RP and distributing that information throughout a PIM-SM domain.
It uses two roles: Candidate-RPs (C-RPs), which announce their desire to be an RP, and Candidate-BSRs (C- BSRs), which collect these announcements and flood them to all other routers in the network via PIM bootstrap messages.
BSR is a " standard protocol " as it is part of the PIMv2 specification. Once configured on R2 (as C-RP) and potentially R1 or R2 (as C-BSR), all other routers will dynamically learn that R2 is the RP for the specified group ranges.
Auto-RP (Option D): While this also provides dynamic RP discovery, it is a proprietary Cisco protocol.
Although Junos supports it for interoperability, the question specifically asks for " standard protocols only, " making BSR the preferred choice.
MSDP (Option A): Multicast Source Discovery Protocol (MSDP) is used to share information about active sources between different PIM domains or for Anycast-RP. It does not handle the initial discovery of an RP within a single domain for standard PIM-SM operations.
Anycast RP (Option C): This is a technique used for RP redundancy and load balancing. While it can use BSR or MSDP for synchronization, it is a design architecture rather than a standalone " standard protocol " for the basic dynamic discovery of an RP in the manner requested here.
Configuration Example for BSR in Junos OS 24.4: To enable this, you would add the following to the RP (R2):
set protocols pim rp bootstrap-discovery
set protocols pim rp candidate-rp 10.222.1.2 group-ranges 224.0.0.0/4
set protocols pim rp candidate-bsr 10.222.1.2


NEW QUESTION # 13
You have deployed 802.1X with server fail fallback enabled on an EX Series switch and specified the vlan-name feature for all access ports. The RADIUS server is unavailable. Which two statements are correct in this scenario? (Choose two.)

Answer: A,D

Explanation:
With 802.1X server-fail fallback enabled and vlan-name configured:
Existing clients that are already authenticated continue to have network access until the reauthentication timer expires.
New clients are placed into the configured fallback VLAN and allowed access even though the RADIUS server is unavailable.


NEW QUESTION # 14
You are deploying IP phones in your enterprise networks. When plugged in. the IP phones must automatically be provided with their geographic location details by the EX Series switches.
In this scenario, which protocol should be used to enable this behavior?

Answer: C

Explanation:
To provide IP phones with geographic location details (such as civic addresses or coordinates) automatically, Juniper EX Series switches utilize theLLDP-MED (Link Layer Discovery Protocol - Media Endpoint Discovery)protocol.
* VoIP Specifics:While standard LLDP (C) is for general device discovery,LLDP-MEDis an enhancement specifically designed for network-to-endpoint communication for VoIP devices.
* Location Identification:LLDP-MED supportsLocation Identification TLVs(Type-Length-Values).
These allow a switch to push geographic or civic location data to an IP phone, which is critical for E911 services and asset tracking.
* Junos Implementation:On EX Series switches, this is typically configured under protocols lldp-med to ensure the switch advertises the necessary location information to connected endpoints.


NEW QUESTION # 15
Exhibit

You want to provide better performance for the video traffic that traverses your network The video traffic enters your network without any class-of-service markings According to Juniper Networks, which two classification methods are performed by the routers shown in the exhibit? (Choose two.)

Answer: A,C

Explanation:
The exhibit illustrates a standard end-to-end Class of Service (CoS) path consisting of an edge router (R1) and core/intermediate routers (R2 and R3).
* Edge Classification (Option B): The scenario specifies that video traffic enters the network without any class-of-service markings. Because there are no DSCP or 802.1p bits to inspect, the ingress router (R1) cannot use simple Behavior Aggregate (BA) classification. Instead, it must use Multifield (MF) classification. MF classification allows the router to look deeper into the packet (Source/Destination IP, Protocol, Port numbers) to identify the video stream and assign it to a specific forwarding class. * Core Classification (Option D): Once R1 has identified the traffic, it will typically apply a rewrite rule on its egress interface to mark the packets with a specific CoS value (like a DSCP code). Consequently, the downstream routers (R2 and R3) do not need to perform expensive deep-packet inspection again. They can use Behavior Aggregate (BA) classification, which simply looks at the markings in the packet header to determine the appropriate forwarding priority.
* Option A and C: These are incorrect because BA classification is impossible on unmarked ingress traffic, and performing MF classification in the core is inefficient and not a recommended Juniper design practice for high-speed transit.


NEW QUESTION # 16
......

Thousands of Enterprise Routing and Switching, Professional (JNCIP-ENT) JN0-650 exam candidates have passed their exam and you should also try Juniper JN0-650 Exam Questions. Enterprise Routing and Switching, Professional (JNCIP-ENT) JN0-650 Exam and start preparation with TestPassKing JN0-650 and pass it with good scores.

Reliable JN0-650 Test Preparation: https://www.testpassking.com/JN0-650-exam-testking-pass.html

JN0-650 exam torrent of us will offer an opportunity like this, Juniper Relevant JN0-650 Questions Our product boosts three versions which include PDF version, PC version and APP online version, Many candidates have doubt about our website if they can pass with JN0-650 actual test dumps, if they can receive our materials soon after payment and in case they fail exam with our JN0-650 actual test dumps how to guarantee their money back, Juniper Relevant JN0-650 Questions Also the software has memory function that it can pick out mistakes you make and it will require you practice many times.

These reviewers contributed their considerable JN0-650 Real Dumps Free hands-on expertise to the development process for Designing Virtual Worlds, A situation might arise in which you want to change JN0-650 some of the parameters that were set when you originally created the file system.

Free PDF 2026 High Pass-Rate JN0-650: Relevant Enterprise Routing and Switching, Professional (JNCIP-ENT) Questions

JN0-650 exam torrent of us will offer an opportunity like this, Our product boosts three versions which include PDF version, PC version and APP online version.

Many candidates have doubt about our website if they can pass with JN0-650 actual test dumps, if they can receive our materials soon after payment and in case they fail exam with our JN0-650 actual test dumps how to guarantee their money back.

Also the software has memory function that it can pick out mistakes you make and it will require you practice many times, We guarantee that we can give you all refund if you fail after using our JN0-650 practice materials.

Report this wiki page